夹具订制
AGG可在机械手和模具间提供精i准的中心。
注塑模具内金属嵌件安放时尤其要注意这一点。
夹具AGG...B 安装在EOAT上,钢管 AGG...C 安装在模具上。
一旦机械手向模具靠近,夹具在压力的作用下逐步向钢管靠近,
并与之接触。
AGG21-B 和 AGG30-B 采用的是双动作安全弹簧,确保在压缩空
气 (NC)缺失时设备的正常运行。
AGG19-B 采用的是单动作复位弹簧(NO)。
Gripper for engagement
The AGG is used to provide a precise centering between the robot
and the mould.
This necessary when metal inserts must be p1aced in the
mould, before the p1astic injection.
The gripper AGG…-B is fitted on the EOAT, while the steel bushing
AGG…-C is fitted on the mould.
Once the robot has approached the mould, the gripper is
pressurized, thus it closes and engages the bushing.
AGG21-B and AGG30-B are double-acting with a safety spring to
keep the gripper engaged even without compressed air (NC).
AGG19-B is single-acting with reset spring (NO).
迷你符合性设备,适用于小抓持器
• X-Y 及 α 角符合性[1]。
• 在方向 Z 为刚性。
• 一根空气导管连接至中央零位 [2]。
• 另一根空气导管可锁定任何偏移位置 [3]。
Mini compliance device, for small grippers
• X-Y and angle α compliance [1].
• Rigid in Z direction.
• One air lead to get the central zero psition [2].
• Another air lead to lock in any offset psition [3].
快速转换模块
• 机械手上的EOAT易于更换。
• 同样适用于真空端。
• 避免了在气动和电气连接时的错误。
• 4, 8,10或12个气动连接。
• 15个电气连接。
• 两部分(机械手侧和治具侧) 分开提供。
• 机械手侧的快速转换模块QCX可用一个安全阀关闭压缩空气。
• 机械手侧的快速转换模块QCY可以在系统失压的时候自动的切
断压缩空气。
• 可选的LOQC锁紧模块。
双钳口自动校准平行i气动夹具(SGP-S系列)
•双动作。
•反冲调整系统。
•小尺寸高i性能。
•紧固的构造使其非常适合重型作业的运用,使用寿命长,免维护。
•不同的紧固和输送选项。
•随时用于 PRO-SN…HS (1) 可编程磁性传感器。
•食物级润滑油FDA-H1。
Double acting.• Backlash adjusting system.• High performance in small dimensions.• The rugged construction lends itself to heavy duty applicationsfor a trouble free long life without maintenance.
Various fastening and air feeding options.• Ready for PRO-SN …HS (1) programmable magnetic sensor.• Food grade grease FDA-H1.
以上信息由专业从事气动夹爪类型的吉玛泰克于2024/5/15 13:00:00发布
转载请注明来源:http://www.zhizhuke.cn/qyzx/jmtkzdh-2753195485.html