吸盘/ NBR-HNBR
VG.LB33 NBR-HNBR 波纹管吸盘
• 适用于搬运塑料零部件
• 适用于表面平坦或轻微弯曲的物体
• 它们能补偿高度的差异
• 是翻转和拾取薄金属板、玻璃板、刨花板或压制木板、塑料层压板的理想选择
• HNBR 版本可在高温下工作,而硅氧烷或其他混合物版本可能会释放出微量的物质。
适用于必须避免材料污染的应用 [PWIS(水性油漆干扰物)]
• HNBR 化合物坚固耐磨,适用于从相关模具中取出热塑料零部件
双钳口自动校准平行i气动钳夹 (DH系列)
• 具有可选弹簧的双动作(正常关闭和正常启动)。
• 长行程或者短行程(1)。
• 可以使用通孔螺丝进行前紧固(2)。
• 动力传动效i率高(1)。
• 可选电磁式或电感式的传感器(3)。
• FDA-H1 食品级润滑脂。
2-jaw self-centering pneumatic parallel gripper
(series DH)
• Double acting with optional springs (normally closed or
normally open).
• Long stroke or short stroke (1).
• P05sibility of front fastening with through screws (2).
• High efficiency force transmission (1).
• Optional magnetic or inductive sensors (3).
• FDA-H1 food-grade grease.
3-jaw self-centring electric gripper
• Plug & p1ay user friendly gripper.
• No electricity con5umption when gripper is engaged.
• No programming required.
• Gripper retention guaranteed in event of blackout.
• Self Adapting jaws part.
• Long life Brushless motor (Brushless DC).
• Built-in motor driver.
• 24 Vdc Low Voltage Power Supply.
• M8x1, 3 poles standard connection.
• Controllable by PLC as a pneumatic valve.
• Fiber-carbon gear reduction.
• 10 milion cycle maintenance-free.
• T-slot style jaws for heavy loads.
• Weight-dimensi0n5-force best trade off.
• Rotary actuator fitting compatible.
• Optional magnetic sensors.
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接(由主模块提供)供电,并触发两个固态继电器的换向:基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出(PNP/2线或NPN)和逻辑(正向或反向)。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
以上信息由专业从事真空泵价格表的吉玛泰克于2024/5/15 11:46:25发布
转载请注明来源:http://www.zhizhuke.cn/qyzx/jmtkzdh-2753113440.html